Scrub drying

Medium area performance (Duomatic C50): 800 m2/h

Automatic removal of adhesive dirt from water-resistant floor coverings using machinery and mechanical/chemical means. The floor is dry.

Choose the right pad/brush for the floor covering.

Direct method: for low-level dirt

Indirect method: for heavy-duty dirt. Do not use on false floors!

Preparatory work (Scrub drying)

Equip and prepare the machine.
Follow the operating instructions.

Add the cleaning solution, correctly dosed, to the water tank.
Choose the right product for the floor covering and use the right dosage.

Remove any loose dirt.
Dusting
Dry/brush vacuum cleaning

Put up the warning sign.

Main work involved (Scrub drying)

Wet mop small obstructed spaces, corners, and edges.
Wet mopping

A) Direct method (Scrub drying)

In one go, wet scrub and wet vacuum clean using a scrubber-drier and a suitable pad/brush.
Observe the relevant driving techniques for the type of machine used.
– Line-operated: work outwards from the cable (jack).

B) Indirect method (Scrub drying)

First, wet scrub only using a scrubberdrier and a suitable pad/brush, but do not vacuum clean.
Observe the relevant driving techniques for the type of machine used.
– Line-operated: work outwards from the cable (jack).

Leave the cleaning solution to take effect.
Do not allow to dry out.

Next, scrub dry.
Only use clean water if necessary.

Final steps (Scrub drying)

Empty the tank, clean the machine and cleaning materials.
Leave the machine open and allow to dry. Wash the pad/brush or replace if necessary.

Charge the battery if necessary.